Pulleys, Rollers, Chains & Belting Supplies

PCI Track Rollers are designed and manufactured to operate in the most adverse conditions. Special sealing provisions allow track rollers to operate in dirt, sand, heat, cold, high speeds, vibration and heavy loads. The roller ends of all track rollers are protected by a tight fitting steel expansion plug.

All bearings are sealed to retain lubricants and exclude contaminants. PCI Track Rollers use heavy duty ball bearings or tapered roller bearings and are lubricated with the proper amount, grade and type of grease. When purchasing a PCI Track Roller, you will receive a reliable, maintenance free, quality product.

• Standard Track Rollers (Plain, Flanged, V-Groove, Channel and I-Beam, U-Groove, Regreaseable)
• Special Duty Track Rollers (Custom Seals, Lubricants, Double or Flange Rollers, Special Platings, Extreme Moisture / Wash Down applications)
• Non-Metallic Track Rollers
• 316 Stainless Steel Track Rollers
• High Temperature Track Rollers (Temperature rated to 390° F)

Clutches, brakes, clutch/brakes, torque limiters

• Torque capacities from 0-6300 in.-lbs
• Bolt-on drives, sprockets, v-belt sheaves and gears
• Virtually maintenance-free
• Custom styles and sizesper specification

PCI Pneumatic Clutches, Brakes and Clutch/Brakes are IDEALLY suited for

• Accumulation, Zone or Zero-Pressure conveyor systems
• High torque capacities from 0 to 6,300 inch pounds
• Low speed – less than 100 RPM
• Occasional starts and stops, no more than 5 cycles per minute

PCI Standard Duty Pulleys & Machined Pulleys:

• 2″ to 12″ diameter
• Various hub styles
• V-groove styles
• Trapezoidal crown for maximum concentricity and reduced belt wear
• Available with lagging

PCI Stainless Steel Pulleys:

• Sanitary/Food Grade
• Corrosive/Washdown
• Available with lagging

PCI Heavy Duty Pulleys:

• 14″ diameters and larger
• 72″ overall face length
• Various hub styles
• Flat face or crowned for maximum concentricity and reduced belt wear
• Available with lagging
• Mine duty and spiral styles available

PCI Wing Pulleys:

• Self-cleaning
• 6″ diameters and larger
• Mine duty and spiral styles available

PCI Take-Up Frames:

• Available in Wide Slot and Narrow Slot styles
• Capable of mounting inside, outside or as part of the conveyor frame

PCI Take-Up Frame Covers:

• Keep debris away from your bearings and adjusting screw
• Cover rotating shafting and other moving parts as a safety feature
• One style fits on existing PCI and Dodge frames
• One style fits over existing Take-up Frames